Joskin TRANS-KTP 22/50 HARDOX 36.771 €
Αριθμός
300142999
Τιμή συμπ. ΦΠΑ 19 %
36.771 €
Τιμή χωρίς ΦΠΑ
30.900 €
Ημιτελές προϊόν
Joskin
Μοντέλο
TRANS-KTP 22/50 HARDOX
Έτος κατασκευής
2020
Περισσότερες πληροφορίες
Είδος οχήματος: Μεταχειρισμένο μηχάνημα
Ημιτελές προϊόν: Joskin
Μοντέλο: TRANS-KTP 22/50 HARDOX
Έτος κατασκευής: 2020
Βάρος (to.): 6.6
Λεπτομέρειες
TRANS-KTP 22/50
Joskin civil engineering tipper
22 tons maximum load = payload
Length 5.06 - 5.28 mtr, width: 2.18 - 2.26 mtr.
2.26 mtr. Height: 0.95 mtr
Volume: 10.90 m
Lifting cylinder oil capacity: 36 liters
Conical self-supporting box
Sides and bottom ( 6mm ) made of Hardox 450
Reinforced upper body rail
One-piece hydraulic rear door made of
HARDOX with large opening angle
Tailgate cylinder integrated in the arm
integrated in the arm
Chassis width: 900 mm
Chassis made from profile tubes: 300 x 150
300 x 1560 x 8 mm
Transverse suspension of the drawbar by
parabolic leaf springs
Double-acting hydraulic support leg with
Direct connection to the tractor
Operation of the support leg and the rear door
by means of a hydraulic distributor
with manually operated 6 - way slide
Rear hydraulic double-acting collision protection
Rear lights type: truck swinging
Steel shot blasting before painting,
Primer Ester Epoxy 2 K
Final coat 2 K total 100 u ,
Fast drying 60°
Wheels 650 / 55 R 26.5 Aliance with
thermoplastic mudguards
Hot-dip galvanized front attachment
TÜV approval for 40 km/h without rear
collision protection
Automatic translation from German without guarantee.
Show original description
Joskin civil engineering tipper
22 tons maximum load = payload
Length 5.06 - 5.28 mtr, width: 2.18 - 2.26 mtr.
2.26 mtr. Height: 0.95 mtr
Volume: 10.90 m
Lifting cylinder oil capacity: 36 liters
Conical self-supporting box
Sides and bottom ( 6mm ) made of Hardox 450
Reinforced upper body rail
One-piece hydraulic rear door made of
HARDOX with large opening angle
Tailgate cylinder integrated in the arm
integrated in the arm
Chassis width: 900 mm
Chassis made from profile tubes: 300 x 150
300 x 1560 x 8 mm
Transverse suspension of the drawbar by
parabolic leaf springs
Double-acting hydraulic support leg with
Direct connection to the tractor
Operation of the support leg and the rear door
by means of a hydraulic distributor
with manually operated 6 - way slide
Rear hydraulic double-acting collision protection
Rear lights type: truck swinging
Steel shot blasting before painting,
Primer Ester Epoxy 2 K
Final coat 2 K total 100 u ,
Fast drying 60°
Wheels 650 / 55 R 26.5 Aliance with
thermoplastic mudguards
Hot-dip galvanized front attachment
TÜV approval for 40 km/h without rear
collision protection
Automatic translation from German without guarantee.
Show original description