Pfanzelt MORITZ FR 75

Numero 300407508

prezzo prezzo su richiesta

Marca Pfanzelt

Modello MORITZ FR 75

anno di costruzione 2024

altre informazioni

Tipo: Macchina nuova

Marca: Pfanzelt

Modello: MORITZ FR 75

anno di costruzione: 2024

ore: 3

Condividere tramite

Dettagli

MORITZ FR 75
(0010) VS.PS_RH-10575/6-II Pfanzelt forestry tractor
(0020) Dimensions:
(0030) - Tracked vehicle with rubber undercarriage AS,
(0040) Track width 300 mm
(0050) - Hydraulically adjustable in width,
(0060) from 1,200 mm to 1600 mm external width
(0070) Telescopic via radio
(0080) - Overall length with attached winch and
(0090) Rear blade approx. 2300 mm
(0100) - Ground clearance: approx. 320 mm
(0110) - Height top edge of frame approx. 1350 mm
(0120) - Slope angle approx. 50° at the front and
(0130) 40 degrees at the rear
(0140) - Weight approx. 1,400 kg in
(0150) Basic equipment
(0160) Engine:
(0170) - Deutz diesel engine TD2.9L4
(0180) - 4 cylinder, water-cooled, turbocharged
(0190) - Output 55 kW/ 75 HP
(0200) - EU emissions stage V
(0210) - Fuel capacity: approx. 45 l
(0220) - Hydraulic oil: approx. 30 l
(0230) - Cleanfix reversible fan
(0240) - Combination cooler water/hydraulic oil
(0250) Travel hydraulics:
(0260) - Closed 2-circuit system
(0270) proportional (2 x 11 kW),
(0280) - All driving functions can be controlled via radio
(0290) controllable
(0300) - Upstream fine oil filtration
(0310) - driving speed infinitely variable from 1.
(0320) gear 0-3 km/h and 2nd gear approx. 0-6 km/h
(0330) - infinitely variable final speed
(0340) adjustable
(0350) - Drift adjustment to compensate for the
(0360) Downhill drift force for
(0370) Mowing across the slope
(0380) - Automatically hydraulically tensioned
(0390) Double guide wheel
(0400) On-board hydraulics:
(0410) - separate oil circuit, pump with approx.
(0420) 18 l/min at 200 bar
(0430) - standard scope of delivery a proportional
(0440) Control unit (for lifting gear) with
(0450) floating position
(0460) - a total of 4 optional
(0470) proportional double-acting valves
(0480) and 2 black/white double-acting valves
(0490) valves
(0500) Chassis:
(0510) - Torsion-resistant box section made of
(0520) special steel
(0530) - Large lockable storage compartment
(0540) integrated into the side of the chassis
(0550) and a storage compartment at the top (open)
(0560) - Attachment points for securing the crawler track
(0570) - Large hood for maintenance work
(0580) - Full-length floor protection tray made of
(0590) solid steel
(0600) - All-round branch deflector with
(0610) integrated hood guard
(0620) - Rear lifting unit as standard with max.
(0630) Lifting force at the coupling point: 11 kN
(0640) - Optional front linkage with max.
(0650) Lifting force at the coupling point: 7 kN
(0660) Operation of the entire machine:
(0670) - Radio remote control for all functions
(0680) - Emergency stop
(0690) - Throttle adjustment of the diesel engine
(0700) - Fan reversal
(0710) - Driving and steering
(0720) - 1st and 2nd gear
(0730) - Drift adjustment
(0740) - Winch control
(0750) - Rear blade up/down
(0760) - Floating hoist position
(0770) - Optional linkage relief
(0780) - Width adjustment of the chassis
(0790) - Reversing the direction of travel (direction reversal)
(0800) - PTO on/off
(0810) - Additional control valves
(0820) - Cable winch operation / external pick-up
(0830) - Signal horn
(0840) - Optional lighting
(0850) ALL RADIO COMMANDS AT ONE OPERATING LEVEL
(0860) VS.PTO SHAFT DRIVE PTO-driven track
(0870) - Maintenance-free, oil-bath running and
(0880) Oil-cooled multi-plate clutch
(0890) PTO shaft speed on transmission approx.
(0900) 540/min at 2,100 rpm
(0910) Direction of rotation when looking at the stub
(0920) in the UZS
(0930) VS.PERFORMANCE HYDRAULI Crawler power hydraulics
(0940) VS.LIFTING DEVICE Lifting device winch
(0950) VS.KETTENVORHANG_FR7 Chain curtain as splash guard
(0960) VS.PROPdouble-actingRAUPE50/75_ Proportional double-acting valve 2/1 (1/1 series)
(0970) VS.PROPdouble-actingRAUPE50/75_ Proportional double-acting valve 3/1 (1/1 series)
(0980) VS.PROPdouble-actingRAUPE50/75_ Proportional double-acting valve 4/1 (1/1 series)
(0990) VS.S/Wdouble-actingRAUPE50/75_L Black/white double-acting valve 1/2
(1000) VS.S/Wdouble-actingRAUPE50/75_L Black/White double-acting valve 2/2
(1010) VS.SPECIAL EQUIPMENT Special paint finish RAL 7021
(1020) TEXT1 Operating instructions and ET list
(1030) VS.FRONTHILFSchneidwerkINDE_R Front auxiliary winch
(1040) - with support bracket and connection stand
(1050) - SNR: 907159
(1060) - pulling force 1.0 to, rope 6mm x 30
(1070) mtr.max. 50 m.
(1080) with rope infeed pulley and drum brake
(1090) Control via
(1100) Crawler radio remote control,
(1110) forward and reverse with
(1120) Freewheel clutch
(1130) A.6X30.1031 Rope for crane winch 6x30 with hook
(1140) G105.950.010.040 Lower deflection pulley for front auxiliary winch
(1150) VS.SPECIAL EQUIPMENT Special paint finish in RAL 7021
(1160) TEXT1 Operating instructions and ET list
(1170) VS.HYDRWINDE6TO50/75 Hydraulic cable winch 6 to caterpillar
(1180) - Drive via worm drive
(1190) by means of hydraulically actuated
(1200) multi-plate clutches
(1210) - Tractive force 60 kN
(1220) - Max. rope take-up 110 m x 11 mm
(1230) - Average rope speed of hydraulically operated (1240)
(1240) 0.40 m/s - multiple-disc brake
(1250) - Sinter disk clutch
(1260) - Worm gear
(1270) - electric solenoid valve control
(1280) (wet anchor)
(1290) Rear blade:
(1300) - Hydraulically height-adjustable with
(1310) pressing function - Rope pulley in the
(1320) Height adjustable - Lifting force on the
(1330) Scraper bar: 14kN -Blade width approx.
(1340) 1100 mm
(1350) - With attachment jaw and K 50 combination pin
(1360) (ball)
(1370) A.11X70.1015 Special forestry rope 11 mm 70 m
(1380) VS.SPECIAL EQUIPMENT Special paint finish in RAL shade 7021
(1390) TEXT1 Operating instructions
(1400) Exhibition machine
Traduzione automatica dal tedesco senza garanzia.
Mostra descrizione originale