BvL van Lengerich V-MIX PLUS 24-2S
Antall
300098678
Pris
Pris på applikasjon
Merke
BvL van Lengerich
Modell
V-MIX PLUS 24-2S
Årsmodell
2023
Ytterligere informasjon
Type: Demonstrasjon maskin
Merke: BvL van Lengerich
Modell: V-MIX PLUS 24-2S
Årsmodell: 2023
Hastighet km/t: 8
Detaljer
V-MIX PLUS 24-2S
BvL feed mixer wagon - external filler
in standard equipment
Base plate made of 20 mm S355 (St. 52-3)
Container wall made of 8 mm S355 (St. 52-3)
HDF version 2.0 (please note height specification)
height)
WITHOUT viewing window in the mixing container
T-drawbar top hitch
Drawbar height 950 mm
Drawbar eye 40 mm, heavy-duty version
Mechanical support leg (telescopic)
Wide-angle swivel joint Standard (1 3/8" Z6)
2-speed reduction gearbox i=1.8 with
hydraulic changeover
Permanently welded overflow ring
Camera system with 2 cameras
rear right and left
to view the discharge
EDS discharge at the rear right side
(width 1100 mm)
Hydraulic feed chute from below
for EDS discharge right rear
(sequence control)
EDS discharge side rear left
(width 1100 mm)
Hydraulic feed chute from below
for EDS discharge left rear
(sequence control)
Two mechanical counter knives,
front bottom rear
Single axle
Parking brake
Hydraulic auxiliary brake
for yard travel 8 km/h
Track width 1600 mm
Single tires 435/50 R19.5
Addition weighing device HL 25
Radio remote control AV70 incl.
Car charging bracket
Platform ladder
Basic mixing auger incl. HB400
pick-up rail and
adjustable blades
Induction-hardened blades
with 1 catch magnet on the 2nd discharge arm
of the rear mixing auger
EL operation with 3 functions
(incl. basic control block)
PTO shaft height 730mm
Automatic translation from German without guarantee.
Show original description
BvL feed mixer wagon - external filler
in standard equipment
Base plate made of 20 mm S355 (St. 52-3)
Container wall made of 8 mm S355 (St. 52-3)
HDF version 2.0 (please note height specification)
height)
WITHOUT viewing window in the mixing container
T-drawbar top hitch
Drawbar height 950 mm
Drawbar eye 40 mm, heavy-duty version
Mechanical support leg (telescopic)
Wide-angle swivel joint Standard (1 3/8" Z6)
2-speed reduction gearbox i=1.8 with
hydraulic changeover
Permanently welded overflow ring
Camera system with 2 cameras
rear right and left
to view the discharge
EDS discharge at the rear right side
(width 1100 mm)
Hydraulic feed chute from below
for EDS discharge right rear
(sequence control)
EDS discharge side rear left
(width 1100 mm)
Hydraulic feed chute from below
for EDS discharge left rear
(sequence control)
Two mechanical counter knives,
front bottom rear
Single axle
Parking brake
Hydraulic auxiliary brake
for yard travel 8 km/h
Track width 1600 mm
Single tires 435/50 R19.5
Addition weighing device HL 25
Radio remote control AV70 incl.
Car charging bracket
Platform ladder
Basic mixing auger incl. HB400
pick-up rail and
adjustable blades
Induction-hardened blades
with 1 catch magnet on the 2nd discharge arm
of the rear mixing auger
EL operation with 3 functions
(incl. basic control block)
PTO shaft height 730mm
Automatic translation from German without guarantee.
Show original description
Kontaktinformasjon
AGRAVIS Technik Saltenbrock GmbH
Zur Fünte 4
49326 Melle-Wellingholzhausen
Tyskland
www.atc-trader.com
Zur Fünte 4
49326 Melle-Wellingholzhausen
Tyskland
www.atc-trader.com